The amaran Tag Dual Wireless Microphone System is a dual wireless microphone system offering high-quality, wireless audio with seamless compatibility across devices. Featuring a plug-and-play design and 48kHz / 24bit HiFi audio, the amaran Tag provides on-the-go creators with easy to use, uninterrupted and clear audio for long recording sessions.

Whether creating with a phone, laptop, tablet, or camera, the amaran Tag simplifies wireless audio with its seamless plug-and-play setup. Plug the Lightning version to compatible iOS devices with its MFI certification,, or use with DSLR or mirrorless cameras with the included 3.5mm TRS audio cable.

Whether creating in a quiet studio or a bustling street, control the amplitude of your signal and how much background noise is filtered out directly on the receiver or via the amaran app. The amaran Tag’s dynamic control ensures your voice remains clear, distinct, and natural in any environment with 3 adjustable levels of gain and voice isolation control from weak to strong.

With up to 11 hours of non-stop audio on a single transmitter, complemented by up to 2 full charging cycles for over 30 hours of combined battery life with the charging case, record all day without worrying about running out of power. And with the ability to record while simultaneously charging your phone, the amaran Tag is perfect for vlogging or streaming for hours on end without interruptions.

With the amaran Tag’s anti-interference technology, you can create confidently with clear and consistent audio, even in the busiest settings. Record from far distances with up to 300m of stable transmission in unobstructed environments and maintain a stable connection up to 45m away even with obstacles such as crowds, walls, or city streets.

The amaran Tag’s 48kHz 24bit audio preserves original sounds while capturing every detail with crystal clear clarity, ensuring your content remains authentic with zero loss. And with the ability to handle sound pressure levels up to 121dB, record confidently in loud environments knowing your audio will remain distortion free.

Whether you’re a solo creator or filming from a distance, start or stop recording from your phone’s camera with a single tap on the transmitter, so you can stay in frame to capture every important moment.

Specifications

Wireless Transmission	2.4GHz Adaptive Frequency
Transmission Range	Non-LOS: 45m / 148ft Line of Sight: 300m / 984ft
Sampling Rate	48KHz / 24bit
Frequency Range	20Hz – 20KHz
Max Sound Pressure Level (SPL)	121dB
Polar Pattern	Omnidirectional (360º)
Microphone Head Size	4mm / 0.16in
Microphone Sensitivity	-35 ±3dB @ 1kHz, 94dB SPL
Transmission Power	10dBm
Signal-to-Noise Ratio (SNR)	Analog Output: >80dB Digital Output: >90dB
Total Harmonic Distortion	<0.5% @ 1kHz
Levels of Gain Control	3 Levels
Levels of Voice Isolation Control	3 Levels
Audio Delay	24ms
Output Modes	Analog Output, Digital Output
Connector Types	Lightning
Battery Type	Lithium-Ion
Battery Voltage	7.4V
Battery Capacity	Transmitter: 180mAh / 0.639Wh Receiver: 305mAh / 1.129Wh Charging Case: 1,900mAh / 7.03Wh
Battery Runtime	Transmitter: Approx. 11 Hours Receiver: Approx. 13.5 Hours
Charging Case Recharge Cycle	2 Full Charging Cycles
Charging Specifications	5V/2A, 5V/1.5A
Charge Time	Transmitter: Approx. 2.2 Hours (0%-100%) Receiver: Approx. 2.2 Hours (0%-100%) Charging Case: Approx. 2.1 Hours (0%-100%)
Charging Input	Transmitter: Pogo Pin Receiver: Pogo Pin, USB Type-C Charging Case: USB Type-C
Operating Temperature	-20ºC - 45ºC / -4ºF - 113ºF
Charging Temperature	0ºC - 45ºC / 32ºF - 113ºF
Control Methods	On-board, amaran App
Firmware Upgradeable	amaran App
Mounting Method	Magnet, Magnetic Clip, Handheld
Dimensions	Transmitter: 4.15 x 2.00 x 1.15cm Receiver: 4.65 x 4.15 x 1.75cm Charging Case: 8.55 x 3.25 x 6.35cm
Weight	Transmitter 10.7g / 0.02lbs Receiver: 24.3g / 0.05lbs Charging Case: 108.3g / 0.24lbs